Runshine International co.,ltd
Runshine International co.,ltd high quality wireless products and wireless solution ,fast action best service
Add to Cart
300mbps Indoor Wireless AP Router Ceiling Mount with 802.1Q VLAN
Description:
What It Does
RS-AP-CM is a best-in-class 802.11n indoor access point designed specifically for business-class environments such as hotels, airports, coffee shops, shopping centers, sporting venues, and university campus. With transfer rates of up to 300Mbps in the 2.4 GHz frequency range, the device provides an adequate level of service to all users who connect with legacy 802.11b/g adapters in addition to the latest 802.11n adapters for faster downloads and instant communication. Integrated Power over Ethernet (PoE) allows installation in areas where power outlets are not readily available. Internally equipped with 2X2 multiple-input, multiple-output (MIMO) antennas improve range and maximize data rates. Field tested to wirelessly cover 8-10 hotel rooms at an indoor operating distance of 40-50 meters and allow simultaneous accesses by up to 30 users.
Stylish Ceiling Mount Design
Housed in a stylish ceiling mountable case, the RS-AP-CM can be installed on a wall or ceiling just as a ceiling lamp and blends in nicely with most interior decorations in a modern hotel. Installed highly on ceiling, it extends optimum wireless signal to multiple neighboring rooms.
Whole Coverage
Internally equipped with 2X 2 multiple-input, multiple-output (MIMO) antennas improve range and maximize data rates. Field tested to wirelessly cover 8-10 hotel rooms at an indoor operating distance of 40-50 meters and allow simultaneous accesses by up to 30 users. Up to 300Mbps wireless rate ensures multiple users an adequate level of service.
Power over Ethernet
The device has integrated Power over Ethernet (PoE) for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
|
Specification |
|||
| Hardware | |||
| MCU | RT3052 | ||
| RF | 2T2R, 300Mbps MIMO tech , comply with IEEE 802.11N standard | ||
| Memory | 32MB DDR RAM (May extend to 64MB) | ||
| Flash | 4MB(May extend to 8MB) | ||
| Interface | 2 x RJ-45 for 10/100 Mbps WAN/LAN Port (Support 12V/24V POE) | ||
| 1 x Reset button(Reset & Factory Defaults) | |||
| 1 x Power DC Jack | |||
| Power | 12V(POE 12V/24V)/1A;110V/220V | ||
| Antenna | Build in 2PCS Omni 5dbi antenna | ||
| Size | 16.8*4.5CM | ||
| RF | |||
| Frequency | 802.11b/g/n: | ||
| 2.4~2.4835GHz | |||
| U.S.,Europe and Japan product covering 2.400 to 2.4835 GHz,programmable for different country regulations | |||
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM | ||
| DSSS = DBPSK, DQPSK, CCK | |||
| Throughput | 300 Mbps | ||
| Sensitivity | 802.11n(2.4GHz) | 802.11g | 802.11b |
| -90dBm @ MCS0 | - 90dBm @ 6Mbps | - 95dBm @ 1Mbps | |
| -70dBm @ MCS7 | - 72dBm @ 54Mbps | - 90dBm @ 11Mbps | |
| -90dBm @ MCS8 | |||
| -68dBm @ MCS15 | |||
| Output Power | Radio1(WLAN1) | ||
| 802.11n(2.4GHz)(± 1.5dBm) | 802.11g(± 1.5dBm) | 802.11b(±1.5dBm) | |
| 25dBm@ MCS0~2/MCS8~10 | 25dBm @ 6~24Mbps | 25dBm @1~11Mbps | |
| 24dBm @ MCS3/MCS11 | 25dBm @ 36Mbps | ||
| 23dBm @ MCS4/MCS12 | 22dBm @ 48Mbps | ||
| 23dBm @ MCS5/MCS13 | 22dBm @ 54Mbps | ||
| 22dBm @ MCS6/MCS14 | |||
| 22dBm @ MCS7/MCS15 | |||
| Software | |
| Operation Mode | Gateway/ AP/ Repeater/ WDS / WISP |
| Protocol/Standard | IEEE 802.3(Ethernet) |
| IEEE 802.3u(Fast Ethernet) | |
| IEEE 802.11b/g/n(2.4G WLAN) | |
| Wireless | Auto-Channel selection |
| Distance Control (802.1x Ack timeout) | |
| Multiple SSID (4 SSID) | |
| BSSID | |
| Security | WEP Encryption-64/128/152 bit |
| WPA/WPA2 Personal (WPA-PSK using TKIP or AES) | |
| WPA/WPA2 Enterprise (WPA-EAP using TKIP) | |
| Hide SSID | |
| Management | |
| System Settings | Web-based configuration (HTTP/Telnet) |
| Firmware Upgrade | Upgrade firmware via web browser or TFTP |
| Administration | Admin Password can be configured |
| System monitoring | Status in hand , useful statistic and Event log |
| Logs | Supports local logs, logs host, logs file export |
| Reset | Reset or factory defaults |
| Backup | Restore settings & configuration of the device to local file |
| Physical Property | |
| Temperature | Working: 0°C~55°C |
| Storage: -20°C to 70°C | |
| Humidity | 5%~95% (typical) |
| Package | |
|
XD9500 complete set
|
|
|
PoE Box & Power Adapter
|
|
| User Manual | |
| 90mm LAN Cable | |
Application:
View of us ;